Kippzonen Brewer MkIII Manual do Utilizador descarregar pdf (Página 31)

MKIII OPERATOR'S MANUAL

final tightening. Care must be taken not to overtighten the bolts as the rubber feet may be

damaged.

4. Connect the AC Power Cable to the 120V/230V connector on the underside of the Tracker,

and connect the Data Communications Cable to the Surge Suppressor Box assembly

mounted to the underside of the Tracker.

Always connect the power cables first, before connecting the communication cables.

5. Connect the remaining cables from the Tracker to appropriate connectors on the Brewer –

Note that each cable / connector combination is unique, which makes it difficult, but not

impossible, to mate the cables incorrectly.

6. Turn ON the Tracker Power Switch and the Brewer Power Switch - both Green Power

indicators will come on, the Brewer will go through an initialization sequence once again, and

the Tracker will be difficult to turn by hand.

7. Turn the Brewer and the Tracker Power Switches OFF, and remove the communications

cable from the Tracker.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 135 136

Sem comentários

Kippzonen Brewer MkIII Manual do Utilizador Página 31